View CartCheck OutNews LetterNews Letter Sign-upWolfe Publishing Company
Wolfe Publishing Company
Handloader MagazineRifle MagazineSuccessful Hunter Magazine
Magazine Subscription Information
Wolfe Publishing Company
HomeShopping/Sporting GoodsBack IssuesLoaddataMy AccountAdvertisingGun Links
Online Magazine Login:    Email:    Password:      Forgot Password    Subscribe to Online Magazine
Starline brass
Rifle Magazine
April - May 2002
Volume 37, Number 2
ISSN: 0017-7393
Number 216
On the cover...
A couple of Model 94 Winchesters represent the nearly 7,000,000 rifles shipped since 1894. Whitetail deer photo by John R. Ford. Rifle photos by Gerald Hudson. Purchase the CD-ROM here
Rifle Magazine
Rifle Magazine Wolfe Publishing Company
Rifle Magazine Featured Articles
Table of Contents
Product Tests
What's New
Rifle Magazine
Whats New

Hornady Neck Turning Tool

Hornady’s new case neck turning tool is the only one in this price range with a cutter adjustable in 1/1000-inch increments to trim the outside of the case neck to absolute uniformity. The super sharp cutting blade keeps an edge practically forever but can be removed for sharpening or a replacement blade.

A special O-ring keeps tension on the cutter adjustment knob. The cutter stays set exactly where you set it. With a wide variety of pilots, Hornady’s new neck turning tool can accept cases of virtually any diameter.

For more information contact Hornady Mfg. Co., Dept. H, PO Box 1848, Grand Island NE 68802; or call 1-800-338-3220;

American Rifle
Home  |  Magazine Subscription Information  |  Shopping / Sporting Goods  |  Back Issues  |  Loaddata  |  Advertising  |  Contact Us  |  Gun Links
Wolfe Publishing Company
Wolfe Publishing Company 2180 Gulfstream Suite A Prescott, Arizona 86301    Call Us Toll-Free 1.800.899.7810