|
Copyright © 2005 by PPC, Inc., unless otherwise indicated.
This site may contain other proprietary notices and copyright information, the
terms of which must be observed and followed.
TERMS AND CONDITIONS OF USE
Please read these terms and conditions of use carefully
before using this website. By using this website, you signify your assent to
these terms of use. If you do not agree to these terms of use, please do not
use the website. Your continued use of this website following the posting of
changes to these terms will mean you accept those changes.
DISCLAIMER
The publisher and/or their respective suppliers make no
representations about the suitability of the information contained in the
documents and related graphics published in this format for any purpose. The
materials in this format are provided “as is” and without warranties of any
kind either express or implied. To the fullest extent permissible pursuant to
applicable law, the client disclaims all warranties, express or implied,
including, but not limited to, implied warranties of merchantability and
fitness for a particular purpose. Applicable law may not allow the exclusion of
implied warranties, so the above exclusion may not apply to you.
The publisher does not warrant that the functions contained
in the materials will be uninterrupted or error-free, that defects will be
corrected. In no event shall the publisher and/or their respective suppliers be
liable for any special, indirect or consequential damages or any damages
whatsoever resulting from loss of use, data or profits, whether in an action of
contract, negligence or other tortuous action, arising out of or in connection
with the use or performance of information available from this website. You
assume the entire cost of all necessary servicing, repair, or correction.
COPYRIGHT
Unless otherwise indicated, all content and graphics in this
format are protected by U.S. Copyright and international treaties and may not
be copied without the express permission of the publisher. Re-use of any
content and graphics on-line or otherwise for any purpose is strictly
prohibited. The content is available for private informational uses off-line
only, provided the content and/or graphics are not modified in any way, and all
copyright and other notices on any copy are retained. For other off-line
informational and noncommercial uses, express written permission must be
granted by the publisher. You are not authorized and strictly forbidden to copy
the PDF files or forward them to any person.
TRADEMARKS
Other product and company names mentioned herein may be the
trademarks of their respective owners. The use of such trademarks should not be
construed as a challenge to ownership of those trademarks. Logos and trademarks
used in the portfolio which are not indicated above are the trademarks,
registered trademarks, or service marks of the publisher. Rifle and Handloader
are registered trademarks.
SOFTWARE AVAILABLE ON THIS CD/DVD
Any software that is made available to download from this website
(“Software”) is the copyrighted work of the publisher and/or its suppliers or
vendors. Use of the Software is governed by the terms of the end user (“License
Agreement”), if any, which accompanies or is included with the Software. An end
user will be unable to install any Software that is accompanied by or includes
a License Agreement, unless he or she first agrees to the License Agreement
terms. The Software is warranted, if at all, only according to the terms of the
License Agreement. Except as warranted in the License Agreement, the client
hereby disclaims all warranties and conditions with regard to the Software,
including all implied warranties and conditions of merchantability, fitness for
a particular purpose, title and non-infringement.
The Software is made available for downloading solely for
use by end users according to the License Agreement. Any reproduction or
redistribution of the Software not in accordance with the License Agreement is
expressly prohibited by law, and may result in severe civil and criminal
penalties. Violators will be prosecuted to the maximum extent possible. Without
limiting the foregoing, copying or reproducing the Software to any other server
or location for further reproduction or redistribution is expressly prohibited.
DOCUMENTS AVAILABLE ON THIS WEBSITE
Permission to use documents (such as press releases and
newsletters) from this website is copyrighted material and strictly forbidden.
Use of such documents from this website is for informational and non-commercial
or personal use only and will not be copied or posted on any network computer
or broadcast in any media, and no modifications to any documents are made. Use
for any other purpose is expressly prohibited by law and may result in severe
civil and criminal penalties. Violators will be prosecuted to the maximum
extent possible.
Documents specified above include the design or layout of
this website or any other publisher owned, operated, licensed or controlled
site. Elements of the website are protected by trade dress and other laws and
may not be copied or imitated in whole or in part. No logo, graphic, sound or
image may be copied or retransmitted unless expressly permitted by the publisher.
The documents and related graphics published on this website
could include technical inaccuracies or typographical errors. Changes are
periodically added to the information herein. Information may be changed or
updated without notice. The publisher and/or their respective suppliers may
make improvements and/or changes in the product(s) and/or the program(s)
described herein at any time without notice.
LIMITATION OF LIABILITY
Under no circumstances, including, but not limited to,
negligence, shall the publisher be liable for any special or consequential
damages that result from the use of, or the inability to use, the materials in
this site, even if the publisher or an authorized representative thereof has
been advised of the possibility of such damages. Applicable law may not allow
the limitation or exclusion of liability or incidental or consequential
damages, so the above limitation or exclusion may not apply to you. In no event
shall the publisher’s total liability to you for all damages, losses, and
causes of action (whether in contract, (including, but not limited to,
negligence), or otherwise) exceed the amount paid by you, if any, for accessing
this format.
LINKS TO THIRD PARTY SITES
The publisher makes no representations whatsoever about any
other web site which you may access through this one. When you access a
non-publisher web site, please understand that it is independent from the
publisher, and that the publisher has no control over the content on that web
site. In addition, a link to a non-publisher web site does not mean that the
publisher endorses or accepts any responsibility for the content, or the use,
of that web site.
The links in this area will let you leave the publisher's
site. The linked sites are not under the control of the publisher, and the
publisher is not responsible for the contents of any linked site or any link
contained in a linked site, or any changes or updates to such sites. The
publisher is providing these links to you only as a convenience, and the
inclusion of any link does not imply endorsement of the site by the publisher.
In no event will the publisher be liable to any party or any
direct, indirect, special or other consequential damages for any use of this
web site, or on any other linked web site, including, without limitation, any
lost profits, business interruption, loss of programs or other data on your
information handling system or otherwise, even if we are expressly advised of
the possibility of such damages. It is up to you to take precautions to ensure
that whatever you select for your use is free of such items as viruses, worms,
trojan horses and other items of a destructive nature.
DISCLAIMER
The load data contained on this site is intended for use
with specific components. Other manufacturers components may not produce
equivalent pressure or velocities; therefore, it is recommended that the user
be familiar with the basic rules of reloading safety. Safety folders are
available from the National Re-loading Manufacturers Association (NRMA) and the
Sporting Arms and Ammunition Manufacturers Institute (SAAMI). All can be abtained
free by writing:
NRMA/SAAMI Safety Folders
One Centerpointe Drive
Suite 300
Lake Oswego, Oregon 97035
Data contained herein is intended for use by individuals who are familiar with
correct and safe handloading practices and procedures. We strongly urge
beginning handloaders to research and study as much information as possible
prior to handlloading. If you are unfamiliar with any reloading operation or
procedure we strongly recommend you become familiar with the operation of your
equipment through the manufacturer's operator's manual and seek technical
assistance.
Because Wolfe Publishing Co and its affiliates have no control over the
individual loading practices and/or components used, no responsibility is
assumed by Rifle and Handloader magazines or PPC, Inc. or its affiliates in
the use of this data. The information is to be used at the sole discretion of
the user and the user assumes all risk.
CAUTION
Wolfe Publishing Co has not independently verified the accuracy of the data
contained on this website. Failure to follow safe loading practices could
result in severe personal injury (including death) or gun damage to the user or
bystanders. Technical data and information contained herein are intended to
provide information based upon the limited experience of individuals under
specific conditions and circumstances. They do not detail the comprehensive
training, procedures, techniques and safety precautions that are absolutely
necessary to properly carry on similar activity. Always consult comprehensive
reference manuals and bulletins for details of proper training requirements,
procedures, techniques and safety precautions before attempting any similar
activity. Be alert- publisher cannot be responsible for errors in published
load data.
CANCELLATION POLICY
All cancellations to subscriptions online or otherwise need to be written in letter format and sent to:
Circulation Department
Wolfe Publishing Co
2625 Stearman Rd Suite A
Prescott, AZ 86301
|
|
|
|
