CopperMelt, Inc., has
introduced a new product called Hunters Extreme CopperMelt. It is a very
powerful, quick and safe bore cleaner for all fouling. This unique product is water based
with a small amount of ammonia that works with enzymes to completely clean and condition
the bore. Abrasive metal brushes can cause damage to both the rifling and the bore, while
leaving about 30 percent or more of the fouling inside the bore.
CopperMelt works by enzymatic action to completely remove and dissolve all copper, lead,
powder and plastic fouling in just a few minutes on contact, using only a soft loose
fitting cotton patch. Hunters Extreme CopperMelt is non-abrasive and inert to steel,
stainless steel, aluminum, blueing, etc., therefore it cannot harm the gun barrel. Because
of the unique chemical and enzyme cleaning action, users dont have to soak the bore
or use abrasive brushes or pastes to try to dislodge the fouling from the bore.
Hunters Extreme CopperMelt will often remove additional fouling from bores that have
been thoroughly cleaned with other products.
Hunters Extreme CopperMelt have usually witnessed dramatically smaller group sizes,
first shots from a clean barrel impacting the center of the eventual group, and they are
able to shoot more shots before fouling enlarges the group size again. Plus, only a few
passes with a damp patch will restore accuracy in less than 90 seconds, muzzle velocity
will usually increase, and chamber pressure will usually decrease.
CopperMelt is great for those who dont clean their guns very often due to the time
and effort involved, for serious shooters who know the benefits of a clean bore or for
shooters who just want to shoot more accurately or get more shots between cleanings.
To learn more about
Hunters Extreme CopperMelt or to place an order, call toll-free at: 1-866-721-6745;
or you can visit online at: www.coppermelt.com.